

Top 5 Tips When Installing Internal Oak Doors
Installing an internal oak door can significantly enhance the aesthetic and value of your home. Oak doors are known for their durability and classic appeal, making them a popular choice. Here are the top 5 tips to ensure a smooth installation process for your new internal oak doors.
Tip 1: Accurate Measurement is Key
Ensure Correct Sizing
- Measure Thrice: Always measure the door opening three times to ensure accuracy—measure the width, height, and depth.
- Account for Gaps: Remember to allow for a 2-3mm gap around the door frame for smooth opening and closing.
Tip 2: Prepare the Door Properly
Trim and Sand for Perfection
- Adjust as Needed: If the door is too large, carefully trim it using a hand planer. Make sure not to remove too much material.
- Smooth Finish: Sand down the edges of the door after trimming to ensure a clean, even fit in the frame.
Tip 3: Precision in Hinge Placement
Secure and Align Hinges
- Measure for Hinge Positions: Place the top hinge about 18 cm (7 inches) from the top and the bottom hinge about 28 cm (11 inches) from the bottom.
- Chisel Accurately: Chisel out the areas marked for the hinges so they sit flush with the door, ensuring the door hangs straight.
Tip 4: Use Quality Tools and Hardware
Invest in Good Equipment
- Select Durable Tools: Use reliable and sturdy tools for installation to avoid any damage to the door or frame.
- Choose Appropriate Hardware: Opt for high-quality hinges, screws, and door handles that can support the weight of an oak door and complement its style.
Tip 5: Final Adjustments and Checks
Ensure Smooth Operation
- Test the Swing: Before finalising the installation, check that the door opens and closes smoothly without any scraping.
- Adjust as Necessary: Make any final adjustments to the hinges or trim to correct any misalignments or sticking.
Summary of Key Tools
Tool | Purpose |
---|---|
Tape Measure | For accurate measurement |
Screwdriver | For attaching hinges and handles |
Hammer | For removing the old door |
Hand Planer | For trimming the new door |
Sandpaper | For smoothing edges |
Chisel | For setting hinges |